合肥新站区办公楼设计毕业论文

 2021-04-16 01:04

摘 要

本设计为安徽合肥新站办公楼,主体由5层框架结构组成。包括建筑设计,结构设计和施工组织设计。建筑设计包括绘制平面图,立面图,剖面图,以及建筑详图。结构设计内容包括荷载计算,内力计算,内力组合,梁柱配筋计算,基础设计,楼梯设计等几方面。在确定计算简图之后,选取典型一榀框架进行计算,计算重力荷载代表值,通过顶点位移法求出自振周期,按底部剪力法计算水平地震荷载作用大小,用D值法求出在水平地震作用和风荷载作用下的结构内力(弯矩、剪力、轴力)。用弯矩分配法计算竖向荷载(恒载及活荷载)作用下的结构内力,将所得的内力进行内力组合,找出最不利的一组或几组内力组合进行梁、柱的配筋计算并绘图。顶层为上人屋面。基础采用柱下独立基础。

关键词 :建筑设计;结构设计;框架结构;PKPM建模;基础设计

The Office Building of Hefei ,Anhui Province

Abstract

This design for the office building of Hefei ,Anhui Province,the main body is 5 frame construction. Including architectural design and structural design two parts. Architectural design includes construction horizontal plan, elevation, as well as building instructional diagram. The structure computation content has the load computation, the internal force computation, the internal force combination, the section computation, the board, the staircase, the foundation design and so on several aspects. After determination computation diagram, selects a pin frame to carry on the computation, has first carried on the gravity load generation of tabular value computation, then extracts using the apex deflection method the self oscillation cycle, according to the base shearing force law computation horizontal earthquake load function size, extracts with the D value law under the horizontal earthquake function gentle breeze load function the structure internal force (bending moment, shearing force, axle strength). Calculate the function structure internal force under vertical load (dead load and live load) with the delamination method and carry on the internal force combination by the obtained internal force, again discovers most disadvantageous group of or a several group of internal force combination carries on Liang, the column matches the muscle to calculate and to draw a chart. Then carries on the floor, the staircase, the foundation matches the muscle computation. The exalted roof uses the bidirectional board design. Check the two-way slab reinforcement calculation with PMCAD program, while completing framework computation with PK program. The foundation uses the independent foundation under column.

Keywords: architectural design;structural design; frame construction; PKPM; foundation

目 录

前 言 1

1 建筑设计 2

1.1 工程简介 2

1.2 设计要点及方案特点 2

1.2.1 布置原则 2

1.2.2 建筑平面设计 2

1.2.3 建筑立面设计 2

1.2.4 屋面排水及地面排水 2

2 设计资料 4

2.1 地质、设计资料 4

2.2 抗震设防要求 4

2.3 结构材料选择 4

2.4 楼屋面做法 4

2.5 墙体做法 4

3 结构布置方案 6

3.1 结构体系的选择 6

3.2 结构的水平及竖向布置 6

3.3 结构承重方案选择 6

3.4 主要构件尺寸及初步估算 6

4 手算一榀框架 8

4.1概述 8

4.2 一榀框架的确定 8

4.3 荷载计算 8

4.3.1 屋面均布恒荷载 8

4.3.2楼面均布恒载 9

4.3.3屋面均布活荷载 9

4.3.4 楼面均布活荷载 9

4.3.5 梁柱自重 9

4.3.6墙体自重 10

4.3.7 计算重力荷载代表值 10

4.4横向框架侧移刚度计算 12

4.4.1横梁线刚度 12

4.4.2横向框架柱的侧移刚度D值 13

4.5风荷载作用下框架结构内力和侧移计算 14

4.5.1风荷载标准值 14

4.5.2风荷载作用下的水平位移验算 15

4.5.3风荷载作用下框架结构内力计算 15

4.6水平地震力作用下的框架内力计算 19

4.6.1水平地震作用计算 19

4.6.2水平地震作用下的位移计算 20

4.6.3水平地震作用下框架梁柱计算 21

4.7 竖向荷载作用下的框架内力计算 24

4.7.1 楼板荷载计算 24

4.7.2 竖向荷载作用下的框架内力计算 25

4.7.3 竖向荷载作用下的柱端集中力计算 26

4.7.4 力矩分配法计算框架弯矩 28

4.7.5 梁端剪力及柱轴力计算 36

4.8 框架内力组合 38

4.8.1 内力组合和梁端负弯矩调幅 38

4.8.2 作用效应组合 38

4.9 截面设计 43

4.9.1 框架梁正截面配筋计算 43

4.9.2 框架梁斜截面配筋计算 45

4.9.3 框架柱 46

5 楼梯构件计算 50

5.1 概述 50

5.2 标准层楼梯设计资料 50

5.3 梯段板设计 50

5.3.1 荷载计算 51

5.3.2 截面设计 51

5.4 平台板设计 52

5.4.1 荷载计算 52

5.4.2 截面设计 52

5.5 平台梁的设计 52

5.5.1 荷载计算 53

5.5.2 截面设计 53

5.6 底层楼梯设计资料 54

5.7 梯段板设计 54

5.7.1 荷载计算 55

5.7.2 截面设计 55

5.8 平台板设计 56

5.8.1 荷载计算 56

5.8.2 截面设计 56

5.9 平台梁的设计 56

5.9.1 荷载计算 57

5.9.2 截面设计 57

5.10 本章小结 58

6 基础设计 59

6.1 总述 59

6.2 设计资料 59

6.3 独立基础设计 59

6.3.1 基础顶部荷载的确定 60

6.3.2 基础尺寸的确定 60

6.3.3 基础抗冲切验算 60

7 结构设计信息 62

7.1 概述 62

7.2 结构设计总信息 62

7.2.1 总信息 62

7.2.2风荷载信息 64

7.2.3地震信息 64

7.2.4活荷载信息 65

7.2.5调整信息 66

7.2.6配筋信息 66

7.2.7设计信息 67

7.2.8荷载组合信息 68

7.2.9各层的质量、质心坐标信息 68

7.2.10各层构件数量、构件材料和层高 69

7.2.11各层风荷载信息 70

7.2.12各层刚心、偏心率、相邻层侧移刚度比等计算信息 70

7.2.13结构整体抗倾覆验算结果 73

7.2.14结构整体稳定验算结果 73

7.2.15楼层抗剪承载力及承载力比值 74

7.3周期 振型 地震力 74

7.4 位移信息 89

8 施工组织设计 104

8.1 综合说明 104

8.1.1 编制说明 104

8.1.2 编制依据 104

8.2工程概况 104

8.2.1工程概况 104

8.2.2建筑工程简介 104

8.2.3结构工程简介 105

8.2.4工程自然环境及现场施工条件 105

8.3施工部署 105

8.3.1 工程主要指标 105

8.3.2确定施工方案 106

8.3.3劳动力安排计划 107

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。