新堂路(华阳路-武澄路)工程施工图设计毕业论文

 2021-04-16 01:04

摘 要

新堂路(华阳路-武澄路)工程为常州天宁经济开发区融合发展区域公共基础设施及综合管廊建设项目(一期)的一部分。新堂路(华阳路-武澄路)为城市主干路,设计车速60km/h,西起规划华阳路,东至武澄路,起点桩号K0 000,终点桩号为K3 049.612长约3000m。

平面设计沿线共设两段圆曲线,半径分别为1000m,14000m,均达到不设超高最小半径要求。纵断面设计中,共有3个变坡点,2个凸形竖曲线,1个凹形竖曲线。新堂路路面面层料为沥青混凝土:面层采用4cm 厚度的细粒式沥青混凝土,5cm 厚度的中粒式沥青混凝土和6cm厚的粗粒式沥青混凝土。基层采用的是24.5cm 厚度的石灰粉煤灰碎石及和18cm 的石灰土。

本次设计过程中主要运用了 AUTO CAD2010、鸿业10.0 设计软件进行道路线形及横纵断面设计,路面结构设计则运用 HPDS 路面设计软件进行。主要设计内容包括:选线定线、平面线形设计、纵断面设计、横断面设计、附属设施设计、路基路面结构设计以及土石方调配与计算。

关键词:城市主干路 道路线形设计 沥青混凝土路面 路基路面结构

Xin Tang road (HuaYang road - Wucheng road) Construction design

Abstract

The Xin Tang (HuaYang Road - Wu Cheng road) engineering for ning economic development zone, changzhou day fusion development regional public infrastructure and comprehensive utility tunnel part of the construction project (phase I). Xin Tang (HuaYang Road - Wu Cheng road) for the urban arterial road, the design speed of 60 km/h, west planning HuaYang Road, Wu Cheng road on the east, the starting point of the pile number K0 000, at the end of the pile number of K3 049.612 is about 3000 m long.

Two circular curves are set along the surface of the plane, and the radius is 1000m, 14000m, which is the minimum radius requirement.In the profile design, there are three slope points, two convex vertical curves and one concave vertical curve. New hall of road surface material for asphalt concrete: surface using 4 cm thickness of fine grained type asphalt concrete, the thickness of 5 cm of grain type asphalt concrete and 6 cm thick coarse type of asphalt concrete. The base is a 24.5 cm thick lime coal ash and 18cm lime soil.

In this design process, we mainly use AUTO CAD-2010, Hongye10.0 design software for road line and cross-sectional design, the design of pavement structure is carried out using HPDS surface design software. Main design content includes: the concept of alignment, horizontal alignment design, profile design, cross-sectional design, lighting design, subgrade pavement structure design and allocate and calculation conditions.

Key words: Urban trunk Road line Design asphalt Concrete pavement structure

目 录

1绪论 1

1.1设计车速 1

1.2交通量预测 1

1.3设计依据 2

1.4设计标准 2

1.5沿线生态状况 3

1.5.1自然环境 3

1.5.2生态环境 3

1.5.3社会环境 3

2公路平面设计 5

2.1公路平面设计 5

2.1.1车道数确定 6

2.1.2选线 6

2.1.3 公路平面线形设计 8

3 纵断面设计 10

3.1概述 10

3.2纵断面设计原则 10

3.3纵坡设计的基本规定 11

3.3.1最大纵坡 11

3.3.2最小纵坡 11

3.4坡长的限制 11

3.5竖曲线设计 12

3.5.1基本要求 12

3.5.2平纵组合设计原则 12

3.6竖曲线要素计算 13

3.7纵断面设计小结 15

4横断面设计 16

4.1横断面设计基本原则 16

4.2横断面几何尺寸的选择 17

4.3土石方的计算 18

4.3.1土石方调配的原则 18

4.3.2土石方的调配 18

4.4横断面设计小结 19

5路基设计 20

5.1路基的构成 20

5.2路基的类型 21

5.3路基处理方法 21

5.3.1道路方面 21

5.3.2河塘或暗塘段路基处理 22

5.3.3桥台接坡段的处理 22

5.3.4路基填土高度控制 22

5.4路基压实标准 22

5.5路基设计小结 23

6.附属设施设计 24

6.1道路照明设计 24

6.1.1照明设计标准 24

6.1.2照明方式 24

6.1.3照明光源及灯具 24

6.1.4照明控制 25

6.2公交车站及无障碍设施等 25

6.3道路交通安全与管理设施。 25

6.4道路绿化工程 26

6.5交叉口设计 26

7.路面设计 27

7.1概述 27

7.2路面的类型 27

7.3设计原则 27

7.4设计弯沉值和容许拉应力计算 28

7.5路面结构厚度计算 29

7.6交工验收弯沉值和层底拉应力计算 31

结论 33

致谢 34

参考文献 35

1绪论

新堂路(华阳路-武澄路)地处江苏省常州市,近年来,常州市坚持构建“对外大开放,对内大循环”交通格局战略目标,已初步形成以高速公路为大动脉、国省干线公路为主骨架、县乡村公路为支脉,辐射全市各个村落的公路交通路网格局。随着经济社会的全面、健康、持续发展,江苏公路进入了前所未有的快速发展阶段,陆续实施了高速公路联网畅通工程、国省道干线公路网化工程、县乡村公路通达工程等跨世纪战略工程。新堂路(华阳路-武澄路)工程为常州天宁经济开发区融合发展区域公共基础设施及综合管廊建设项目(一期)的一部分。新堂路(华阳路-武澄路)为城市主干路,在城市中起着关键作用。

路线经过地区为平原,属于亚热带季风气候,常年气候温和,雨量充沛,四季分明。常州春末夏初时多有梅雨发生,夏季炎热多雨,最高气温度常达36℃以上,冬季空气湿润,气候阴冷。

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。