湖南省邵阳市黄塘乡到白仓镇二级公路施工图设计毕业论文

 2021-04-16 12:04

摘 要

本设计为邵阳市黄塘乡到白仓镇二级公路施工图设计常规设计,地势较为平坦。拟建公路路段全长4815.721米,采用双向两车道形式,无中央分隔带,设计时速为60km/h,路面结构采用沥青路面。整个排水系统由边沟、排水沟组成。本设计分为初步设计和详细设计两个阶段。

初步设计中,首先根据交通量确定道路等级,然后在地形图上确定两条备选路线,对所定路线进行方案比选,从中选择最佳方案。

详细设计从确定方案中进行平面设计,纵断面设计,横断面设计,前期工作较初步设计更具体化,此外还对路基,路面,排水,进行了详细设计。

通过这次设计不但了解建设公路的各个步骤,而且也能熟练的运用AUTOCAD以及纬地道路设计软件进行制图。

关键词:路线设计;平面设计;纵断面设计;路基路面

Abstract

This design is a conventional design for the construction of secondary roads from Huangtang Township to Baicang Town, Shaoyang City, with a relatively flat topography. The length of the proposed highway section is 4815.721 meters. It adopts a two-way two-lane form with no central separation zone. The design speed is 60km/h, and the pavement structure uses asphalt pavement. The entire drainage system consists of side ditch and drainage ditch. This design is divided into two phases, preliminary design and detailed design.

In the preliminary design, firstly, the road grade is determined according to the traffic volume, then two alternative routes are determined on the topographic map, and the selected route is compared with the plan, from which the best plan is selected.

Detailed design from the determination of the plan for the plane design, vertical section design, cross-section design, the initial work more concrete than the preliminary design, in addition to the subgrade, road surface, drainage, detailed design.

Through this design, we not only understand the various steps in the construction of the highway, but also can use AUTOCAD and road design software in the latitude to make drawings.

Keywords: route design; plane design; longitudinal section design; cross section design

Keywords: Route Design, Profile Design, Graphic Design, Cross Section Design

目录

一 工程概况及设计说明 1

1.1 工程概况 1

1.2 设计依据 2

二 路线设计 4

2.1 道路等级及技术标准的确定 4

2.1.1 道路等级确定 4

2.1.2 道路等级确定 5

2.2 路线平面设计 7

2.2.1 平面线形设计要点 7

2.2.2 平曲线设计步骤 7

2.2.3 平曲线要素计算 7

2.2.4 路线里程桩号计算 9

2.2.5 路线逐桩坐标计算 11

2.3 路线纵断面设计 14

2.3.1 纵断面设计原则 14

2.3.2 纵断面设计步骤 14

2.3.3 竖曲线要素计算 15

2.3.4 纵断面设计高程计算 17

2.4 线形检验及评价 19

2.4.1 线形组合检验 19

2.4.2 线形规范检验 19

三 路基设计 22

3.1 路基横断面设计 22

3.1.1 路幅设计 22

3.1.2 路面横断面的布置 22

3.1.3 路拱及加宽超高设计 22

3.1.4 路基土石方计算 23

3.2 一般路基设计 23

3.3 边坡防护设计 26

3.4 边坡稳定性分析 27

3.4.1 计算基本参数设定 28

3.4.2 稳定性分析验算 29

3.5 挡土墙设计 31

3.5.1 挡土墙类型选择 31

3.5.2 挡土墙布置 32

3.5.3 挡土墙设计 32

3.6 路基填料选择 36

四 路面设计 38

4.1 路面类型选择 38

4.2 沥青路面结构设计 38

4.2.1 基本资料 38

4.2.2 路面材料参数与结构设计 39

4.2.3 路面结构厚度计算 39

4.3 路面方案 43

五 排水设计 45

5.1 路基排水设计 45

5.2 路面排水设计 45

结论 46

致谢 47

参考文献 48

1工程概况及设计说明

工程概况

(1)路线设计

平曲线在达到规范要求的前提下,结合规划道路所要途径的控制点;竖曲线设计主要考虑对山岭岩体的开挖量不宜过大,同时尽可能的少占用农田以及其他民用土地,并综合考虑线型平顺和优化。

1)平面设计主要指标

① 路线总长(M):4815.721

②平曲线最小半径(米/个):1500/1

③平曲线长占路线总长(%):64.603

④直线最大长度(米):706.728

2)纵断面设计主要指标

① 最大纵坡(%/处):4.19/1

② 最短纵坡长(米):231.721

③ 竖曲线占路线长(%):67.157

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。