徐州正阳路A标施工图设计毕业论文

 2021-04-16 02:04

摘 要

本次毕业设计的题目是徐州正阳路A标施工图设计,道路全长约1700m(K0 000~K1 675.572),设计车速为40km/h,双向四车道。

本次项目设计的目的:按照实测地形图以及相关的补充资料,根据道路勘测设计基本原则以及路基路面工程基本理论,综合考虑当地的技术和经济条件,设计一条经济上可行,技术上合理的公路,严格按照施工图设计过程进行独立作业。

经过查寻相应的规范,可以确定城市道路的等级以及设计所需的各种参数。平面设计时,在平面图中进行选线,之后对道路路线进行平面设计,本次设计的路线全程为直线段。纵断面设计时设置了两个竖曲线,并且也满足了平纵面线形组合设计的各种要求。在横断面设计中,确定了横断面的组成及各种要素后,绘制横断面图。交叉口设计的基本内容是确定交叉口形式。排水设计主要是路面排水以及雨水管的设计和布置。路面设计的内容有路面类型设计、结构设计。

关键词:线形设计; 排水设计; 交叉口设计

Design of A - standard Construction Drawing for Zhengyang Road in

ABSTRACT

The design of the graduation project is mainly to Xuzhou city road construction design, need to design part of Xuzhou Zhengyang Road A section, the road length of about 1700m (K0 000 ~K1 675.572), the design speed of 40km/h, Two-way four-lane.

The purpose of this project is to design an economically viable and technically reasonable road based on the measured topographic maps and relevant supplementary information, according to the basic principles of road survey and design and the basic theory of roadbed pavement engineering, taking into account the local technical and economic conditions , In strict accordance with the construction design process for independent operations.

Find the corresponding specifications, determine the level of the city road and the design of the various parameters required in the plan to select the line, after the road route for graphic design, the route is no circular curve, the whole line segment. There are two vertical curves in the design of the profile, and also meet the various requirements of the flat longitudinal line combination design. In the cross-sectional design, the cross-sectional composition and various elements are determined and the cross-sectional view is drawn. The basic content of the intersection design is to determine the intersection form. Drainage design is mainly pavement drainage and rainwater pipe design and layout. Pavement design includes pavement type and structural design.

Key words: linear design; drainage design; intersection design

目 录

1 概论 1

1.1工程概况 1

1.2设计依据 1

1.3设计原则、标准及指标 1

1.4设计内容 3

2 道路平面设计 4

2.1平面线形设计原则 4

2.2道路平面线形设计 5

3 纵断面设计 7

3.1纵坡设计 7

3.2竖曲线设计与计算 8

3.3本章小结 12

4 道路横断面设计 13

4.1道路路幅设计 13

4.2机动车道及非机动车道设计 13

4.3车行道的路拱横坡度 14

4.4人行道设计 14

4.5绿化带及照明设计 14

4.6管线布置 16

5 排水设计 17

5.1路面排水设计 17

5.2雨水管的布置和设计 17

5.3雨水口及检查井的布置 18

6 平面交叉口设计 20

6.1 平面交叉设计的原则 20

6.1交叉口平面设计 21

7 路面结构的设计与计算 23

7.1路面的结构层次与材料要求 23

7.2路面等级、类型及累计当量轴次的计算 24

7.3 沥青混凝土路面设计 25

总结 39

致 谢 40

参考文献 41

1 概论

1.1工程概况

正阳路北延位于沛县新城区北片区,是一条南北走向的城市主干道,公路起始于徐州市深圳路,终止于曹参路,设计里程约1.7km,设计时速为40km/h。采用三幅路,路幅宽度为33m,双向四车道。目前沛县正充分发挥临近徐州的区位和交通优势,积极挖掘器物流和商贸活动的潜力,进一步提升城市建设的质与量。

1.2设计依据

(1)设计任务书

(2)道路红线规划图

(3)地形图(电子版,1:1000)

(4)现场调查资料

(5)公路路线设计规范(JTG D20-2006)

(6)公路工程技术标准(JTG B01-2015)

(7)公路沥青路面设计规范(JTG D50-2006)

(8)道路勘测设计(第三版)

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。